72V36110L6BBG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 144 |
| Packaging | Tape & Reel |
| Published | 2008 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN; ASYNCHRONOUS MODE IS ALSO POSSIBLE |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Operating Mode | SYNCHRONOUS |
| Max Supply Current | 40mA |
| Frequency (Max) | 166MHz |
| Access Time | 4 ns |
| Organization | 128KX36 |
| Standby Current-Max | 0.015A |
| Memory Density | 4718592 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 6 ns |
| Height Seated (Max) | 1.97mm |
| Length | 13mm |
| Width | 13mm |
| Thickness | 1.76mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V36110L6BBG8 Overview
FIFO memory chip is contained in the BGA package.In this case, it is packaged in case number Tape & Reel .Mounting it in the Surface Mount way is recommended.A supply voltage of 3.3V allows for high efficiency.The number of terminations in FIFO means is 144 .There are 144 pins for operation.There is a maximum current requirement of 40mA for its operation.A supply voltage of 3.3V is recommended for FIFO's maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.A self-contained gadget is contained in FIFOs .It has a OTHER FIFO memory type IC.It is possible to operate the FIFO memory chip at very low supply voltages, such as 3.15V volts.This FIFO memory chip can handle maximum supply voltages of 3.45V volts.It consists of a total of 144 pins.During regular operation, the FIFO memory's maximum value is 166MHz .It is also possible to generate RETRANSMIT; AUTO POWER DOWN; ASYNCHRONOUS MODE IS ALSO POSSIBLE with the use of this FIFO memory.
72V36110L6BBG8 Features
FIFOs category
Frequency at most
72V36110L6BBG8 Applications
There are a lot of Integrated Device Technology (IDT) 72V36110L6BBG8 FIFOs Memory applications.
- High-speed disk
- Address mapping
- GPS Offender Tracking
- Thermal Management for DDR3 Memory Modules
- Battery Charger
- Fabrication Site
- Data-acquisition systems
- Medical Monitoring Device
- Event Recorder
- Transistors
