72V36110L6PF8
| Parameters | |
|---|---|
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 6 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 166MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 166MHz |
| Access Time | 4 ns |
| Density | 4.5 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
72V36110L6PF8 Overview
FIFO memory chip is included in the TQFP package.Surface Mount is recommended as the mounting method.When the supply voltage is 3.3V there is the possibility of high efficiency.A total of 128 terminations can be found in FIFO means.As far as the operation pins are concerned, they are 128 pins.For its operation, 40mA is the maximum current required.In order to maximize efficiency, the supply voltage should be set to 3.3V .It operates at 0°C degrees Celsius to ensure reliability.70°C °C is the memory logic's maximum operating temperature that allows stable operation.A self-contained gadget is contained within FIFOs .The IC of the part is OTHER FIFO memory type.FIFO memory chips may be operated at very low supply voltages, such as 3.15V volts.FIFO memory is capable of handling a maximum supply voltage of 3.45V volts.Approximately 128 pins are attached to it.It is capable of maintaining good accuracy with a frequency of 166MHz .166MHz is the FIFO memory IC's maximum value for regular operation.
72V36110L6PF8 Features
FIFOs category
Frequency at most
72V36110L6PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V36110L6PF8 FIFOs Memory applications.
- Battery Charger
- MP3 Interface for Automobile
- HDD
- Microprogramming
- Down-Hole Energy Drilling
- Programmable Logic Controller
- Computer networks
- Data-acquisition systems
- Measurement Equipment
- Data
