72V36110L7-5PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 133.3MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 133.3MHz |
| Access Time | 5 ns |
| Density | 4.5 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V36110L7-5PF Overview
The TQFP package contains FIFO memory chip.Memory IC's recommended mounted way is Surface Mount .When the supply voltage is 3.3V , high efficiency is possible.A total of 128 terminations are contained within FIFO means.There are 128 pins on the operation pins.FIFO requires a minimum of 40mA current to operate.In order to maximize efficiency, the supply voltage should be set to 3.3V .It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.In FIFOs , this gadget is self-contained.This part is equipped with an IC of type OTHER FIFO memory.FIFO memory chips may be operated at very low supply voltages, such as 3.15V volts.A maximum supply voltage of 3.45V V can be handled by this FIFO memory chip.It consists of a total of 128 pins.In spite of the frequency 133.3MHz , it is capable of maintaining a good level of accuracy.During normal operation, the FIFO memory's maximum value is 133.3MHz .
72V36110L7-5PF Features
FIFOs category
Frequency at most
72V36110L7-5PF Applications
There are a lot of Integrated Device Technology (IDT) 72V36110L7-5PF FIFOs Memory applications.
- Magnetic memories
- Routers
- Optical memories
- Network bridges
- Tape controllers
- HDD
- Network switching/routing
- Emulators
- Telecommunication
- MP3 Interface for Automobile
