72V3613L12PF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 120 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 4 |
| Number of Terminations | 120 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAIL BOX BYPASS REGISTER |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Frequency | 83.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 120 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Frequency (Max) | 83.3MHz |
| Access Time | 8 ns |
| Data Bus Width | 36b |
| Organization | 64X36 |
| Density | 2.3 kb |
| Standby Current-Max | 0.0004A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 12 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
72V3613L12PF Overview
You will find FIFO memory chip in the TQFP package.Surface Mount is memory IC's recommended mounting method.If the supply voltage is set to 3.3V , high efficiency can be achieved.A total of 120 terminations are contained within FIFO means.Operation pins are 120 .When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.FIFOs contains this gadget in its entirety.This part is equipped with an IC of type OTHER FIFO memory.FIFO may operate at a very low supply voltage, such as 3V V.FIFO memory is capable of handling a maximum supply voltage of 3.6V volts.The FIFO memory IC is equipped with a total of 120 pins.When the frequency is set to 83.3MHz , the system can maintain good accuracy.There is 83.3MHz FIFO memory IC's maximum value for regular operation.Using this gadget, MAIL BOX BYPASS REGISTER can also be generated.
72V3613L12PF Features
FIFOs category
Frequency at most
72V3613L12PF Applications
There are a lot of Integrated Device Technology (IDT) 72V3613L12PF FIFOs Memory applications.
- Signal processing
- Programmable Logic Controller
- Portable Information Devices
- Test site
- SPD for DDR3 Memory Modules
- Tape controllers
- Cardiac Monitoring Device
- General Data Collection Applications at Low-Temperatures
- Extended product life cycle
- IP Radio
