72V3622L10PQF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 132 |
| Published | 2013 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 132 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAIL BOX BYPASS REGISTER |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 132 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 400mA |
| Max Supply Current | 400mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Data Bus Width | 36b |
| Organization | 256X36 |
| Density | 18 kb |
| Standby Current-Max | 0.001A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 4.57mm |
| Length | 24.13mm |
| Width | 24.13mm |
| Thickness | 3.55mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
72V3622L10PQF Overview
You will find FIFO memory chip in the PQFP package.Memory IC's recommended mounted way is Surface Mount .If the supply voltage is set to 3.3V , high efficiency can be achieved.A total of 132 terminations are contained within FIFO means.132 pin is used for operation.FIFO requires a minimum of 400mA current to operate.When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.It is contained within FIFOs .It has a type BI-DIRECTIONAL FIFO memory IC.If the supply voltage is very low, such as 3V V, FIFO may be able to operate.An input voltage of 3.6V V is the maximum that FIFO memory can handle.There are a total of 132 pins on this FIFO memory IC.When the frequency is set to 100MHz it can maintain good accuracy.The memory logic's maximum value is 100MHz for regular operation.It is also possible to generate MAIL BOX BYPASS REGISTER using this FIFO memory.
72V3622L10PQF Features
FIFOs category
Frequency at most
72V3622L10PQF Applications
There are a lot of Integrated Device Technology (IDT) 72V3622L10PQF FIFOs Memory applications.
- A/D output buffers
- Computer Systems
- One assembly
- Programmable Logic Controller
- High-speed graphics pixel buffer
- Buses
- Routers
- High-speed disk
- Notebook
- SPI Bus Flash Memory Device
