Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Package / Case |
TQFP |
Number of Pins |
128 |
Packaging |
Tape & Reel |
Published |
2010 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 |
Number of Terminations |
128 |
ECCN Code |
EAR99 |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Additional Feature |
MAILBOX |
HTS Code |
8542.32.00.71 |
Subcategory |
FIFOs |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Frequency |
100MHz |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
128 |
Operating Supply Voltage |
3.3V |
Temperature Grade |
COMMERCIAL |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
3V |
Element Configuration |
Dual |
Nominal Supply Current |
400mA |
Frequency (Max) |
100MHz |
Access Time |
6.5 ns |
Organization |
256X36 |
Density |
9 kb |
Standby Current-Max |
0.001A |
Parallel/Serial |
PARALLEL |
Sync/Async |
Synchronous |
Word Size |
36b |
Memory IC Type |
OTHER FIFO |
Bus Directional |
Bidirectional |
Retransmit Capability |
No |
FWFT Support |
Yes |
Output Enable |
YES |
Cycle Time |
10 ns |
Height Seated (Max) |
1.6mm |
Length |
20mm |
Width |
14mm |
Thickness |
1.4mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
72V3623L10PFG8 Overview
TQFP is the package in which FIFO memory chip is contained.This FIFO memory chip is packaged as a Tape & Reel .Mounting it in Surface Mount is recommended.With a supply voltage of 3.3V volts, high efficiency is possible.FIFO means contains a total of 128 terminations.Operation pins are 128 .In order to maximize efficiency, the supply voltage should be set to 3.3V .It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Its maximum operating temperature of 70°C °C ensures stable operation.It is self-contained in FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.Typically, FIFO would work at 3V volts, but it may also work at higher voltages.There is a maximum supply voltage of 3.6V volts that FIFO memory can handle.This FIFO memory IC is equipped with 128 pins in total.A frequency of 100MHz is sufficient to maintain good accuracy.A FIFO memory's maximum value of 100MHz can be used for regular operation.It is also possible to generate MAILBOX with the use of this FIFO memory.
72V3623L10PFG8 Features
FIFOs category
Frequency at most
72V3623L10PFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72V3623L10PFG8 FIFOs Memory applications.
- Event Recorder
- Disk Controllers
- Computers
- Cameras
- Look-up Tables
- Medical Monitoring Device
- General Data Collection Applications at Extreme High-Temperatures
- One assembly
- Address mapping
- Rate buffers