72V3624L10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 400mA |
| Max Supply Current | 400mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 256X36 |
| Density | 18 kb |
| Standby Current-Max | 0.001A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V3624L10PF8 Overview
FIFO memory chip can be found in the TQFP package.In terms of packaging, it comes in Tape & Reel cases.Mounting it in the Surface Mount way is recommended.When the supply voltage is 3.3V there is the possibility of high efficiency.FIFO means contains a total of 128 terminations.128 pins are used for operation.FIFO requires a minimum of 400mA current to operate.In order to maximize efficiency, the supply voltage should be set to 3.3V .This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.70°C °C is the memory logic's maximum operating temperature that allows stable operation.There is a self-contained gadget within FIFOs .There is a memory type BI-DIRECTIONAL FIFO in the IC of this part.In some cases, FIFO operates at a very low supply voltage, such as 3V V.FIFO memory can handle a maximum supply voltage of 3.6V V.The FIFO memory IC has a total of 128 pins.Despite a frequency of 100MHz , it is capable of maintaining good accuracy.It is recommended that the FIFO memory's maximum value be set to 100MHz .
72V3624L10PF8 Features
FIFOs category
Frequency at most
72V3624L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V3624L10PF8 FIFOs Memory applications.
- Temporary storage elements
- Telecommunication
- High-speed disk
- Look-up Tables
- SPD for DDR3 Memory Modules
- Laser Receiver System
- MP3 Interface for Automobile
- Optical memories
- PC peripheral
- Emulators
