72V3631L20PF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 120 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 4 |
| Number of Terminations | 120 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAILBOX |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 120 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 400mA |
| Max Supply Current | 400μA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Data Bus Width | 36b |
| Organization | 512X36 |
| Density | 18 kb |
| Standby Current-Max | 0.0004A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
72V3631L20PF Overview
This package is included in TQFP .It is recommended that memory IC be mounted in the Surface Mount direction.When the supply voltage is 3.3V there is the possibility of high efficiency.As a result of this, FIFO means contains 120 terminations.As far as the operation pins are concerned, they are 120 pins.In order to operate it, it requires 400μA volts of current.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.There is a self-contained gadget within FIFOs .A OTHER FIFO memory type IC is used in the part.It is possible to operate the FIFO memory chip at very low supply voltages, such as 3V volts.FIFO memory can handle a maximum supply voltage of 3.6V V.The FIFO memory IC is equipped with a total of 120 pins.In the presence of a 50MHz frequency, it can maintain good accuracy.Regular operation has a FIFO memory's maximum value of 50MHz .This gadget can also generate MAILBOX .
72V3631L20PF Features
FIFOs category
Frequency at most
72V3631L20PF Applications
There are a lot of Integrated Device Technology (IDT) 72V3631L20PF FIFOs Memory applications.
- IP Radio
- Consumer
- Alarm System
- Disk Controllers
- Computer networks
- Test Equipment
- Thermal Management for DDR3 Memory Modules
- Programmable Logic Controller
- General Data Collection Applications at Extreme High-Temperatures
- Firmware loaders
