banner_page

72V3640L10PF

128 Terminations3.3V 128 Pin FIFO memory IC6.5 ns Min 3.15V VMax 3.45V V


  • Manufacturer: Integrated Device Technology (IDT)
  • Nocochips NO: 378-72V3640L10PF
  • Package: TQFP
  • Datasheet: PDF
  • Stock: 623
  • Description: 128 Terminations3.3V 128 Pin FIFO memory IC6.5 ns Min 3.15V VMax 3.45V V(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Lead, Tin
Mount Surface Mount
Package / Case TQFP
Number of Pins 128
Published 2008
JESD-609 Code e0
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 3
Number of Terminations 128
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn85Pb15)
Max Operating Temperature 70°C
Min Operating Temperature 0°C
HTS Code 8542.32.00.71
Subcategory FIFOs
Technology CMOS
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 225
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.5mm
Frequency 100MHz
Time@Peak Reflow Temperature-Max (s) 20
Pin Count 128
Qualification Status Not Qualified
Operating Supply Voltage 3.3V
Temperature Grade COMMERCIAL
Max Supply Voltage 3.45V
Min Supply Voltage 3.15V
Element Configuration Dual
Nominal Supply Current 40mA
Max Supply Current 40mA
Frequency (Max) 100MHz
Access Time 6.5 ns
Organization 1KX36
Density 36 kb
Standby Current-Max 0.015A
Parallel/Serial PARALLEL
Sync/Async Synchronous
Word Size 36b
Memory IC Type OTHER FIFO
Bus Directional Unidirectional
Retransmit Capability Yes
Output Enable YES
Cycle Time 10 ns
Height Seated (Max) 1.6mm
Length 20mm
Width 14mm
Thickness 1.4mm
RoHS Status RoHS Compliant
Lead Free Contains Lead

72V3640L10PF Overview


FIFO memory chip can be found in the TQFP package.Mounting it in the Surface Mount way is recommended.Supply voltages of 3.3V are capable of achieving high efficiency.A total of 128 terminations are contained within FIFO means.FIFO design has 128 operation pins.In order to operate FIFO design, a maximum current of 40mA is required.A voltage of 3.3V should be used for FIFO's maximum efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.70°C °C is the memory logic's maximum operating temperature that allows stable operation.The gadget is self-contained and can be found in FIFOs .The IC of the part is OTHER FIFO memory type.FIFO may operate at very low supply voltages, such as 3.15V volts.The FIFO memory chip is capable of handling maximum supply voltages of 3.45V volts.There are a total of 128 pins on this board.When the frequency is set to 100MHz , the system can maintain good accuracy.100MHz is the FIFO memory IC's maximum value for regular operation.

72V3640L10PF Features


FIFOs category
Frequency at most

72V3640L10PF Applications


There are a lot of Integrated Device Technology (IDT) 72V3640L10PF FIFOs Memory applications.

  • General Data Collection Applications at Extreme High-Temperatures
  • Cardiac Monitoring Device
  • Data-acquisition systems
  • Consumer Systems
  • MP3 Interface for Automobile
  • Video time base correction
  • Consumer
  • Notebook
  • Computers
  • Magnetic memories

Write a review

Note: HTML is not translated!
    Bad           Good