72V3640L15PF8
| Parameters | |
|---|---|
| Memory Density | 36864 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 128 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN; ASYNCHRONOUS MODE IS ALSO POSSIBLE |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Operating Mode | SYNCHRONOUS |
| Max Supply Current | 40mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 1KX36 |
| Standby Current-Max | 0.015A |
72V3640L15PF8 Overview
FIFO memory chip is included in the LQFP package.Mounting it in Surface Mount is recommended.An input voltage of 3.3V results in high efficiency.The number of terminations in FIFO means is 128 .These are the 128 pins for operation.There is a maximum current requirement of 40mA for its operation.When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.There is a self-contained gadget within FIFOs .The IC of the part is OTHER FIFO memory type.Typically, FIFO would work at 3.15V volts, but it may also work at higher voltages.The memory logic's maximum supply voltage is 3.45V volts.Currently, it has 128 pins.Regular operation has a FIFO memory's maximum value of 66.7MHz .Using this gadget, RETRANSMIT; AUTO POWER DOWN; ASYNCHRONOUS MODE IS ALSO POSSIBLE can also be generated.
72V3640L15PF8 Features
FIFOs category
Frequency at most
72V3640L15PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V3640L15PF8 FIFOs Memory applications.
- Controlled baseline
- SPI Bus Flash Memory Device
- Address mapping
- Tape controllers
- Video Processing
- Consumer
- IP Camera Buffer
- Telecommunication
- Extended product-change notification
- Video
