72V3640L15PFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 1KX36 |
| Density | 36 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V3640L15PFI Overview
TQFP is a package that contains FIFO memory chip.Surface Mount is memory IC's recommended mounting method.If the supply voltage is set to 3.3V , high efficiency can be achieved.FIFO means contains 128 terminations.FIFO design has 128 operation pins.There is a maximum current requirement of 40mA for its operation.When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.For reliability, FIFO works at a minimum temperature of -40°C degrees Celsius.As a result of having a maximum operating temperature of 85°C degrees Celsius, the unit is capable of exhibiting stable operation.There is a self-contained gadget within FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.There is a possibility that FIFO can operate at very low supply voltages, such as 3.15V V.FIFO memory is capable of handling a maximum supply voltage of 3.45V volts.It consists of a total of 128 pins.With a frequency of 66.7MHz , it exhibits good accuracy.During regular operation, 66.7MHz is the FIFO memory's maximum value.
72V3640L15PFI Features
FIFOs category
Frequency at most
72V3640L15PFI Applications
There are a lot of Integrated Device Technology (IDT) 72V3640L15PFI FIFOs Memory applications.
- Test site
- Programmable Logic Controller
- Thermal Management for DDR3 Memory Modules
- GPS Offender Tracking
- Laser Receiver System
- Battery Charger
- Wireless
- Portable Information Devices
- Multimedia
- Signal processing
