72V3640L15PFI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 1KX36 |
| Density | 36 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V3640L15PFI8 Overview
FIFO memory chip can be found in the TQFP package.A Surface Mount mounting method is recommended.A supply voltage of 3.3V allows for high efficiency.128 terminations are contained in FIFO means.The operation pins are 128 pins.In order to operate FIFO design, a maximum current of 40mA is required.When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.For reliability, FIFO works at a minimum temperature of -40°C degrees Celsius.By using a memory logic's maximum operating temperature of 85°C degrees Celsius, stable operation can be achieved.A self-contained gadget is contained in FIFOs .The IC of the part is OTHER FIFO memory type.It is possible to operate the FIFO memory chip at very low supply voltages, such as 3.15V volts.There is a maximum supply voltage of 3.45V volts that FIFO memory can handle.There are a total of 128 pins on this FIFO memory IC.A frequency of 66.7MHz is sufficient to maintain good accuracy.Regular operation has a FIFO memory's maximum value of 66.7MHz .
72V3640L15PFI8 Features
FIFOs category
Frequency at most
72V3640L15PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72V3640L15PFI8 FIFOs Memory applications.
- MP3 Interface for Automobile
- Cardiac Monitoring Device
- Thermal Management for DDR3 Memory Modules
- Transistors
- Event Recorder
- Video Processing
- Digital buffering
- Disk Controllers
- Game Controller
- Computer Systems
