72V3640L6BB8
| Parameters | |
|---|---|
| Height Seated (Max) | 1.97mm |
| Length | 13mm |
| Width | 13mm |
| Thickness | 1.76mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 144 |
| Packaging | Tape & Reel |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Frequency | 166MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 166MHz |
| Access Time | 4 ns |
| Organization | 1KX36 |
| Density | 36 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 6 ns |
72V3640L6BB8 Overview
You can find FIFO memory chip in package BGA .Tape & Reel case is used for packaging.Surface Mount is memory IC's recommended mounting method.A supply voltage of 3.3V allows for high efficiency.As a result of this, FIFO means contains 144 terminations.The operation pins are 144 pins.In order for FIFO design to operate, FIFO design requires a maximum current of 40mA .The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.FIFOs contains this gadget in its entirety.ICs of type OTHER FIFO are used in the FIFO memory chip.Low supply voltages, such as 3.15V V, may be required for operation.FIFO memory is capable of handling a maximum supply voltage of 3.45V volts.There are a total of 144 pins on this FIFO memory IC.In the presence of a 166MHz frequency, it can maintain good accuracy.During regular operation, 166MHz is the FIFO memory's maximum value.
72V3640L6BB8 Features
FIFOs category
Frequency at most
72V3640L6BB8 Applications
There are a lot of Integrated Device Technology (IDT) 72V3640L6BB8 FIFOs Memory applications.
- SPI Bus Flash Memory Devices
- Firmware loaders
- Notebook
- Controlled baseline
- Extended product life cycle
- HDD
- Video Processing
- Wireless
- Optical memories
- Computer Systems
