72V3640L6PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 166MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 166MHz |
| Access Time | 4 ns |
| Organization | 1KX36 |
| Density | 36 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 6 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V3640L6PF8 Overview
You will find FIFO memory chip in the TQFP package.Mounting it in Surface Mount is recommended.A supply voltage of 3.3V allows for high efficiency.FIFO means contains 128 terminations.128 pin is used for operation.For its operation, 40mA is the maximum current required.A 3.3V supply voltage will ensure FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.There is a self-contained gadget within FIFOs .There is a memory type OTHER FIFO in the IC of this part.Typically, FIFO would work at 3.15V volts, but it may also work at higher voltages.An input voltage of 3.45V V is the maximum that FIFO memory can handle.There are a total of 128 pins on this board.A frequency of 166MHz is sufficient to maintain good accuracy.For regular operation, the memory logic's maximum value is 166MHz .
72V3640L6PF8 Features
FIFOs category
Frequency at most
72V3640L6PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V3640L6PF8 FIFOs Memory applications.
- Portable Information Devices
- Video
- General Data Collection Applications at Extreme High-Temperatures
- Address mapping
- Consumer Systems
- Alarm System
- Smart Meter
- Programmable Logic Controller
- Industrial Systems
- Controlled baseline
