72V3640L7-5PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 133.3MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 133.3MHz |
| Access Time | 5 ns |
| Organization | 1KX36 |
| Density | 36 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V3640L7-5PF Overview
TQFP is a package that contains FIFO memory chip.The recommended mounting method for this FIFO products is Surface Mount .It is possible to achieve high efficiency with a supply voltage of 3.3V .A total of 128 terminations can be found in FIFO means.As far as the operation pins are concerned, they are 128 pins.In order to operate it, it requires 40mA volts of current.In order to maximize efficiency, the supply voltage should be set to 3.3V .For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.A self-contained gadget is contained within FIFOs .It has a type OTHER FIFO memory IC.In some cases, FIFO operates at a very low supply voltage, such as 3.15V V.The FIFO memory chip is capable of handling maximum supply voltages of 3.45V volts.A total of 128 pins are present on the FIFO memory IC.A frequency of 133.3MHz is sufficient to maintain good accuracy.During normal operation, the FIFO memory's maximum value is 133.3MHz .
72V3640L7-5PF Features
FIFOs category
Frequency at most
72V3640L7-5PF Applications
There are a lot of Integrated Device Technology (IDT) 72V3640L7-5PF FIFOs Memory applications.
- Seismic Data Collection at Extreme Temperatures
- Wireless
- Computers
- Portable Information Devices
- A/D output buffers
- Extended product life cycle
- Multi-stage synchronizer
- Game Controller
- Rate buffers
- General Data Collection Applications at Extreme High-Temperatures
