72V3640L7-5PFGI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 133.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 133.3MHz |
| Access Time | 5 ns |
| Organization | 1KX36 |
| Memory Width | 36 |
| Density | 36 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
72V3640L7-5PFGI Overview
FIFO memory chip is included in the TQFP package.It is pointing in the direction of Surface Mount .When the supply voltage is 3.3V there is the possibility of high efficiency.128 terminations are contained in FIFO means.Operation pins are 128 .In order for FIFO design to operate, FIFO design requires a maximum current of 40mA .In order to maximize efficiency, the supply voltage should be set to 3.3V .This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.A memory logic's maximum operating temperature of 85°C degrees Celsius assures stable operation.The gadget in FIFOs is self-contained.In this part, the memory type is OTHER FIFO .Typically, FIFO would work at 3.15V volts, but it may also work at higher voltages.An input voltage of 3.45V V is the maximum that FIFO memory can handle.It has a total of 128 pins on it.With a frequency of 133.3MHz , it exhibits good accuracy.Normally, the FIFO memory's maximum value is 133.3MHz .
72V3640L7-5PFGI Features
FIFOs category
Frequency at most
72V3640L7-5PFGI Applications
There are a lot of Integrated Device Technology (IDT) 72V3640L7-5PFGI FIFOs Memory applications.
- MP3 Interface for Automobile
- IP Camera Buffer
- Rate buffers
- SPD for DDR3 Memory Modules
- Magnetic memories
- Temporary storage elements
- Data
- Video
- Game Consoles
- Firmware loaders
