72V3642L10PF8
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 120 |
| Packaging | Tape & Reel |
| Published | 2013 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 4 |
| Number of Terminations | 120 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAIL BOX BYPASS REGISTER |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 120 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 400mA |
| Max Supply Current | 400mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Data Bus Width | 36b |
| Organization | 1KX36 |
| Density | 72 kb |
| Standby Current-Max | 0.001A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
72V3642L10PF8 Overview
You can find FIFO memory chip in package TQFP .There is a case Tape & Reel in which it is packaged.A Surface Mount mounting method is recommended.When the supply voltage is 3.3V , high efficiency is possible.In FIFO means, there are 120 terminations.FIFO design has 120 operation pins.The maximum current required for its operation is 400mA .In order to maximize efficiency, the supply voltage should be set to 3.3V .This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.Its maximum operating temperature of 70°C °C ensures stable operation.In FIFOs , there is a self-contained gadget.This part has a memory type of BI-DIRECTIONAL FIFO .There is a possibility that FIFO can operate at very low supply voltages, such as 3V V.A maximum voltage of 3.6V volts can be applied to FIFO memory.There are a total of 120 pins on this board.A frequency of 100MHz is sufficient to maintain good accuracy.During regular operation, the FIFO memory's maximum value is 100MHz .This gadget can also be used to generate MAIL BOX BYPASS REGISTER .
72V3642L10PF8 Features
FIFOs category
Frequency at most
72V3642L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V3642L10PF8 FIFOs Memory applications.
- Battery Charger
- Controlled baseline
- Wireless
- HDD
- Look-up Tables
- IP Radio
- SPI Bus Flash Memory Device
- Game Controller
- Disk Controllers
- Tape controllers
