72V3642L10PFG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 120 |
| Packaging | Bulk |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 120 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAIL BOX BYPASS REGISTER |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 120 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Memory Size | 128B |
| Element Configuration | Dual |
| Max Supply Current | 400mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Data Bus Width | 2b |
| Standby Current-Max | 0.005A |
| Memory Density | 36864 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V3642L10PFG Overview
The LQFP package contains FIFO memory chip.This FIFO memory chip is packaged as a Bulk .There is a 128B MB memory on the FIFO chips, which can be used to store both applications and data.The recommended mounting method for this FIFO products is Surface Mount .It is possible to achieve high efficiency with a supply voltage of 3.3V .A total of 120 terminations can be found in FIFO means.As far as the operation pins are concerned, they are 120 pins.In order to operate FIFO design, a maximum current of 400mA is required.For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.This gadget is self-contained in?FIFOs .It has a BI-DIRECTIONAL FIFO memory type IC.In some cases, FIFO operates at a very low supply voltage, such as 3V V.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.There are a total of 120 pins on this board.A FIFO memory's maximum value of 100MHz can be used for regular operation.It is also possible to generate MAIL BOX BYPASS REGISTER using this FIFO memory.Using 1 circuits allows for enhanced flexibility.
72V3642L10PFG Features
128B memory size
FIFOs category
Frequency at most
72V3642L10PFG Applications
There are a lot of Integrated Device Technology (IDT) 72V3642L10PFG FIFOs Memory applications.
- Seismic Data Collection at Extreme Temperatures
- Data communications
- IP Camera Buffer
- SPD for DDR3 Memory Modules
- Laser Receiver System
- Transistors
- Game Controller
- Consumer Systems
- Event Recorder
- MP3 Interface for Automobile
