72V3644L10PF
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 400mA |
| Max Supply Current | 400mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 1KX36 |
| Density | 72 kb |
| Standby Current-Max | 0.001A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
72V3644L10PF Overview
You can find FIFO memory chip in package TQFP .Surface Mount is memory IC's recommended mounting method.When the supply voltage is 3.3V , high efficiency is possible.In FIFO means, there are 128 terminations.Operation pins are 128 .FIFO requires a minimum of 400mA current to operate.In order to maximize efficiency, the supply voltage should be set to 3.3V .The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.In FIFOs , there is a self-contained gadget.The IC of the part is BI-DIRECTIONAL FIFO memory type.Typically, FIFO would work at 3V volts, but it may also work at higher voltages.A maximum supply voltage of 3.6V V can be handled by this FIFO memory chip.Currently, it has 128 pins.With a frequency of 100MHz , it exhibits good accuracy.A FIFO memory's maximum value of 100MHz can be used for regular operation.
72V3644L10PF Features
FIFOs category
Frequency at most
72V3644L10PF Applications
There are a lot of Integrated Device Technology (IDT) 72V3644L10PF FIFOs Memory applications.
- Routers
- Smart Meter
- SPD for DDR3 Memory Modules
- Extended product life cycle
- PC peripheral
- Measurement Equipment
- One assembly
- Communications Systems
- SPI Bus Flash Memory Devices
- Data-acquisition systems
