72V3644L10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 400mA |
| Max Supply Current | 400mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 1KX36 |
| Density | 72 kb |
| Standby Current-Max | 0.001A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V3644L10PF8 Overview
FIFO memory chip is contained in the TQFP package.In this case, it is packaged in case number Tape & Reel .The recommended mounting way is Surface Mount .A supply voltage of 3.3V is capable of producing high efficiency.A total of 128 terminations can be found in FIFO means.128 pin is used for operation.FIFO design requires a maximum current of 400mA to operate.FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.A self-contained gadget is contained within FIFOs .The IC of the part is BI-DIRECTIONAL FIFO memory type.FIFO memory chips may be operated at very low supply voltages, such as 3V volts.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.Approximately 128 pins are attached to it.With a frequency of 100MHz , it exhibits good accuracy.During normal operation, the FIFO memory's maximum value is 100MHz .
72V3644L10PF8 Features
FIFOs category
Frequency at most
72V3644L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V3644L10PF8 FIFOs Memory applications.
- Measurement Equipment
- Cameras
- Buses
- Signal processing
- Multi-stage synchronizer
- One assembly
- Transistors
- Product traceability
- IP Radio
- Extended product life cycle
