72V3650L10PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 2KX36 |
| Density | 72 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V3650L10PF Overview
TQFP is the package in which FIFO memory chip is contained.A Surface Mount mounting method is recommended.When the supply voltage is 3.3V , high efficiency is possible.FIFO consists of 128 terminations, which indicates that FIFO means is empty.These are the 128 pins for operation.For its operation, 40mA is the maximum current required.When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.An operating temperature of 70°C °C is necessary for stable operation.The gadget is self-contained and can be found in FIFOs .A OTHER FIFO memory type IC is used in the part.FIFO may operate at very low supply voltages, such as 3.15V volts.The memory logic's maximum supply voltage is 3.45V volts.The FIFO memory IC is equipped with a total of 128 pins.When the frequency is set to 100MHz , the system can maintain good accuracy.The memory logic's maximum value is 100MHz for regular operation.
72V3650L10PF Features
FIFOs category
Frequency at most
72V3650L10PF Applications
There are a lot of Integrated Device Technology (IDT) 72V3650L10PF FIFOs Memory applications.
- Firmware loaders
- Computers
- Networking
- Down-Hole Energy Drilling
- Optical memories
- IP Radio
- HDD
- Game Consoles
- Video
- SPD for DDR3 Memory Modules
