72V3650L10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN; ASYNCHRONOUS MODE IS ALSO POSSIBLE |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Operating Mode | SYNCHRONOUS |
| Max Supply Current | 40mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 2KX36 |
| Standby Current-Max | 0.015A |
| Memory Density | 73728 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V3650L10PF8 Overview
The TQFP package contains FIFO memory chip.Memory IC's recommended mounted way is Surface Mount .An input voltage of 3.3V results in high efficiency.The number of terminations in FIFO means is 128 .As far as the operation pins are concerned, they are 128 pins.The maximum current required for its operation is 40mA .When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.There is a self-contained gadget within FIFOs .There is a memory type OTHER FIFO in the IC of this part.The FIFO memory chip may be operated at very low supply voltages, such as3.15V volts.The memory logic's maximum supply voltage is 3.45V volts.Approximately 128 pins are attached to it.A FIFO memory's maximum value of 100MHz can be used for regular operation.This gadget can also be used to generate RETRANSMIT; AUTO POWER DOWN; ASYNCHRONOUS MODE IS ALSO POSSIBLE .
72V3650L10PF8 Features
FIFOs category
Frequency at most
72V3650L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V3650L10PF8 FIFOs Memory applications.
- A/D output buffers
- Industrial Systems
- Network switching/routing
- Extended product-change notification
- Cardiac Monitoring Device
- IP Camera Buffer
- Computer networks
- General Data Collection Applications at Low-Temperatures
- Test site
- Multi-stage synchronizer
