72V3650L6PF
| Parameters | |
|---|---|
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 6 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 128 |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN; ASYNCHRONOUS MODE IS ALSO POSSIBLE |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Operating Mode | SYNCHRONOUS |
| Max Supply Current | 40mA |
| Frequency (Max) | 166MHz |
| Access Time | 4 ns |
| Organization | 2KX36 |
| Standby Current-Max | 0.015A |
| Memory Density | 73728 bit |
| Parallel/Serial | PARALLEL |
72V3650L6PF Overview
LQFP is a package that contains FIFO memory chip.Mounting it in Surface Mount is recommended.When the supply voltage is 3.3V , high efficiency is possible.FIFO consists of 128 terminations, which indicates that FIFO means is empty.In the case of the operation pins, they are 128 pins.FIFO design requires a maximum current of 40mA to operate.In order to maximize efficiency, the supply voltage should be set to 3.3V .Keeping the temperature at 0°C degrees Celsius ensures its reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.There is a self-contained gadget within FIFOs .A OTHER FIFO memory type IC is used in the part.Typically, FIFO would work at 3.15V volts, but it may also work at higher voltages.This FIFO memory chip can handle maximum supply voltages of 3.45V volts.Currently, it has 128 pins.The memory logic's maximum value is 166MHz for regular operation.It is also possible to generate RETRANSMIT; AUTO POWER DOWN; ASYNCHRONOUS MODE IS ALSO POSSIBLE by using this FIFO memory.
72V3650L6PF Features
FIFOs category
Frequency at most
72V3650L6PF Applications
There are a lot of Integrated Device Technology (IDT) 72V3650L6PF FIFOs Memory applications.
- Consumer
- Game Consoles
- GPS Offender Tracking
- Data communications
- Desktop Computers
- Application that requires re-writable nonvolatile parameter memory
- Optical memories
- Buses
- Cameras
- Test Equipment
