72V3650L6PFG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN; ASYNCHRONOUS MODE IS ALSO POSSIBLE |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Operating Mode | SYNCHRONOUS |
| Max Supply Current | 40mA |
| Frequency (Max) | 166MHz |
| Access Time | 4 ns |
| Organization | 2KX36 |
| Standby Current-Max | 0.015A |
| Memory Density | 73728 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 6 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V3650L6PFG8 Overview
TQFP is the package in which FIFO memory chip is contained.The recommended mounting way is Surface Mount .If the supply voltage is set to 3.3V , high efficiency can be achieved.A total of 128 terminations can be found in FIFO means.The operation pins are 128 pins.In order to operate FIFO design, a maximum current of 40mA is required.A voltage of 3.3V should be used for FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.It is self-contained in FIFOs .This part is equipped with an IC of type OTHER FIFO memory.There is a possibility that FIFO can operate at very low supply voltages, such as 3.15V V.The memory logic's maximum supply voltage is 3.45V volts.The FIFO memory IC has a total of 128 pins.It is recommended that the FIFO memory's maximum value be set to 166MHz .Using this gadget, RETRANSMIT; AUTO POWER DOWN; ASYNCHRONOUS MODE IS ALSO POSSIBLE can also be generated.
72V3650L6PFG8 Features
FIFOs category
Frequency at most
72V3650L6PFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72V3650L6PFG8 FIFOs Memory applications.
- Character generators
- Video Processing
- GPS Offender Tracking
- Buses
- Transistors
- Computer Systems
- Data
- Product traceability
- HDD
- Thermal Management for DDR3 Memory Modules
