72V3653L10PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 400mA |
| Max Supply Current | 400mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 2KX36 |
| Density | 72 kb |
| Standby Current-Max | 0.0004A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V3653L10PF Overview
The TQFP package contains FIFO memory chip.Surface Mount is memory IC's recommended mounting method.A supply voltage of 3.3V is capable of producing high efficiency.FIFO consists of 128 terminations, which indicates that FIFO means is empty.128 pins are used for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 400mA .FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.It operates at 0°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.It is self-contained in FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.FIFO may operate at a very low supply voltage, such as 3.15V V.A maximum supply voltage of 3.45V volts can be handled by the FIFO memory chip.This FIFO memory IC is equipped with 128 pins in total.Despite a frequency of 100MHz , it is capable of maintaining good accuracy.During regular operation, 100MHz is the FIFO memory's maximum value.
72V3653L10PF Features
FIFOs category
Frequency at most
72V3653L10PF Applications
There are a lot of Integrated Device Technology (IDT) 72V3653L10PF FIFOs Memory applications.
- Analog-to-digital converters
- Down-Hole Energy Drilling
- IP Camera Buffer
- Seismic Data Collection at Extreme Temperatures
- Programmable Logic Controller
- Cameras
- GPS Offender Tracking
- Look-up Tables
- Character generators
- Microprogramming
