72V3656L10PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAIL BOX BYPASS REGISTER |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Nominal Supply Current | 400mA |
| Max Supply Current | 400mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 2KX36 |
| Density | 144 kb |
| Standby Current-Max | 0.001A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Triple-Bus |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V3656L10PF Overview
You will find FIFO memory chip in the TQFP package.It is pointing in the direction of Surface Mount .With a supply voltage of 3.3V volts, high efficiency is possible.A total of 128 terminations are contained within FIFO means.128 pins are the operation pins.FIFO requires a minimum of 400mA current to operate.A voltage of 3.3V should be used for FIFO's maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.In FIFOs , this gadget is self-contained.This part is equipped with an IC of type BI-DIRECTIONAL FIFO memory.FIFO memory chips may be operated at very low supply voltages, such as 3.15V volts.FIFO memory can handle a maximum supply voltage of 3.45V V.It consists of a total of 128 pins.In spite of the frequency 100MHz , it is capable of maintaining a good level of accuracy.It is recommended that the FIFO memory's maximum value be set to 100MHz .This gadget can also be used to generate MAIL BOX BYPASS REGISTER .
72V3656L10PF Features
FIFOs category
Frequency at most
72V3656L10PF Applications
There are a lot of Integrated Device Technology (IDT) 72V3656L10PF FIFOs Memory applications.
- IP Camera Buffer
- Test site
- Multimedia
- Buses
- Multi-stage synchronizer
- GPS Offender Tracking
- High-speed graphics pixel buffer
- Networking
- Microprogramming
- Fabrication Site
