72V3656L15PF8
| Parameters | |
|---|---|
| Max Supply Current | 400mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 2KX36 |
| Density | 144 kb |
| Standby Current-Max | 0.001A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Triple-Bus |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAIL BOX BYPASS REGISTER |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 400mA |
72V3656L15PF8 Overview
TQFP is the package in which FIFO memory chip is contained.The package comes in a case of Tape & Reel .Memory IC's recommended mounted way is Surface Mount .Supply voltages of 3.3V are capable of achieving high efficiency.I found that it has 128 terminations in FIFO means.There are 128 pins on the operation pins.FIFO requires a minimum of 400mA current to operate.The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.The gadget is self-contained and can be found in FIFOs .It has a type BI-DIRECTIONAL FIFO memory IC.FIFO may operate at a very low supply voltage, such as 3V V.There is a maximum supply voltage of 3.6V volts that FIFO memory can handle.It consists of a total of 128 pins.With a frequency of 66.7MHz , it exhibits good accuracy.During regular operation, the FIFO memory's maximum value is 66.7MHz .Using this gadget, MAIL BOX BYPASS REGISTER can also be generated.
72V3656L15PF8 Features
FIFOs category
Frequency at most
72V3656L15PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V3656L15PF8 FIFOs Memory applications.
- Extended product-change notification
- High-speed disk
- Seismic Data Collection at Extreme Temperatures
- Magnetic memories
- SPI Bus Flash Memory Devices
- High-speed graphics pixel buffer
- Test Equipment
- General Data Collection Applications at Low-Temperatures
- Fabrication Site
- Communications Systems
