72V3660L10PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 128 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 4KX36 |
| Density | 144 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V3660L10PF Overview
TQFP is a package that contains FIFO memory chip.It is recommended that memory IC be mounted in the Surface Mount direction.When the supply voltage is 3.3V , high efficiency is possible.FIFO means contains 128 terminations.128 pins are used for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 40mA .When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.A self-contained gadget is contained in FIFOs .In this part, the memory type is OTHER FIFO .If the supply voltage is very low, such as 3.15V V, FIFO may be able to operate.A maximum voltage of 3.45V volts can be applied to FIFO memory.This FIFO memory IC is equipped with 128 pins in total.In the presence of a 100MHz frequency, it can maintain good accuracy.A FIFO memory's maximum value of 100MHz can be used for regular operation.
72V3660L10PF Features
FIFOs category
Frequency at most
72V3660L10PF Applications
There are a lot of Integrated Device Technology (IDT) 72V3660L10PF FIFOs Memory applications.
- Rate buffers
- Controlled baseline
- Computers
- Portable Information Devices
- Address mapping
- Temporary storage elements
- Down-Hole Energy Drilling
- HDD
- Event Recorder
- Seismic Data Collection at Extreme Temperatures
