72V3660L10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 4KX36 |
| Density | 144 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V3660L10PF8 Overview
You can find FIFO memory chip in package TQFP .Mounting it in the Surface Mount way is recommended.When the supply voltage is 3.3V , high efficiency is possible.FIFO means contains 128 terminations.In the case of the operation pins, they are 128 pins.In order to operate FIFO design, a maximum current of 40mA is required.The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.The gadget is self-contained and can be found in FIFOs .It has a OTHER FIFO memory type IC.FIFO memory chips may be operated at very low supply voltages, such as 3.15V volts.A maximum voltage of 3.45V volts can be applied to FIFO memory.Currently, it has 128 pins.A frequency of 100MHz is sufficient to maintain good accuracy.For regular operation, the memory logic's maximum value is 100MHz .
72V3660L10PF8 Features
FIFOs category
Frequency at most
72V3660L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V3660L10PF8 FIFOs Memory applications.
- Data-acquisition systems
- Address mapping
- Character generators
- Battery Charger
- Data communications
- SPD for DDR3 Memory Modules
- Communications Systems
- Consumer Systems
- Video time base correction
- Portable Information Devices
