72V3660L15PFI
| Parameters | |
|---|---|
| Density | 144 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 4KX36 |
72V3660L15PFI Overview
FIFO memory chip is included in the TQFP package.It is recommended that memory IC be mounted in the Surface Mount direction.When the supply voltage is 3.3V there is the possibility of high efficiency.A total of 128 terminations can be found in FIFO means.128 pin is used for operation.For its operation, 40mA is the maximum current required.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of -40°C degrees Celsius.The stable operation is enabled by the memory logic's maximum operating temperature of 85°C °C.A self-contained gadget is contained within FIFOs .The IC of the part is of the type OTHER FIFO .Low supply voltages, such as 3.15V V, may be required for operation.A maximum supply voltage of 3.45V volts can be handled by the FIFO memory chip.There are a total of 128 pins on this FIFO memory IC.A frequency of 66.7MHz is sufficient to maintain good accuracy.66.7MHz is the FIFO memory IC's maximum value for regular operation.
72V3660L15PFI Features
FIFOs category
Frequency at most
72V3660L15PFI Applications
There are a lot of Integrated Device Technology (IDT) 72V3660L15PFI FIFOs Memory applications.
- SPI Bus Flash Memory Devices
- Analog-to-digital converters
- Product traceability
- Portable Information Devices
- Medical Monitoring Device
- High-speed disk
- Microprogramming
- Signal processing
- Switches
- Desktop Computers
