72V3660L6PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 166MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 166MHz |
| Access Time | 4 ns |
| Organization | 4KX36 |
| Density | 144 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 6 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V3660L6PF Overview
TQFP is the package in which FIFO memory chip is contained.It's packaged in the shape of a Bulk .Surface Mount is recommended as the mounting method.It is possible to achieve high efficiency with a supply voltage of 3.3V .The number of terminations in FIFO means is 128 .In the case of the operation pins, they are 128 pins.There is a maximum current requirement of 40mA for its operation.For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.Its maximum operating temperature of 70°C °C ensures stable operation.It is self-contained in FIFOs .This part has a memory type of OTHER FIFO .There is a possibility that FIFO can operate at very low supply voltages, such as 3.15V V.FIFO memory can handle a maximum supply voltage of 3.45V volts.The FIFO memory IC has a total of 128 pins.It maintains good accuracy at a 166MHz frequency.It is recommended that the FIFO memory's maximum value be set to 166MHz .
72V3660L6PF Features
FIFOs category
Frequency at most
72V3660L6PF Applications
There are a lot of Integrated Device Technology (IDT) 72V3660L6PF FIFOs Memory applications.
- Network switching/routing
- Video Processing
- Transistors
- Magnetic memories
- IP Camera Buffer
- High-speed disk
- Rate buffers
- Emulators
- Code converters
- Medical Monitoring Device
