72V3660L7-5PF
| Parameters | |
|---|---|
| Number of Pins | 128 |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 133.3MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 133.3MHz |
| Access Time | 5 ns |
| Organization | 4KX36 |
| Density | 144 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
72V3660L7-5PF Overview
You can find FIFO memory chip in the TQFP package.It is pointing in the direction of Surface Mount .A supply voltage of 3.3V allows for high efficiency.FIFO consists of 128 terminations, which indicates that FIFO means is empty.These are the 128 pins for operation.For its operation, 40mA is the maximum current required.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.A self-contained gadget is contained within FIFOs .A OTHER FIFO memory type IC is used in the part.Typically, FIFO would work at 3.15V volts, but it may also work at higher voltages.FIFO memory is capable of handling a maximum supply voltage of 3.45V volts.As a result, it contains a total of 128 pins.When the frequency is set to 133.3MHz , the system can maintain good accuracy.It is recommended that the FIFO memory's maximum value be set to 133.3MHz .
72V3660L7-5PF Features
FIFOs category
Frequency at most
72V3660L7-5PF Applications
There are a lot of Integrated Device Technology (IDT) 72V3660L7-5PF FIFOs Memory applications.
- Alarm System
- One assembly
- Portable Information Devices
- Code converters
- Data-acquisition systems
- Cardiac Monitoring Device
- Emulators
- Telecommunication
- SPI Bus Flash Memory Devices
- Down-Hole Energy Drilling
