72V3660L7-5PFGI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 133.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 128 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 133.3MHz |
| Access Time | 5 ns |
| Data Bus Width | 36b |
| Organization | 4KX36 |
| Density | 144 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V3660L7-5PFGI Overview
This package is included in TQFP .Surface Mount is recommended as the mounting method.A supply voltage of 3.3V allows for high efficiency.As a result of this, FIFO means contains 128 terminations.There are 128 pins on the operation pins.There is a maximum current requirement of 40mA for its operation.The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.FIFO operates at a minimum temperature of -40°C degrees Celsius to ensure reliabilFIFOy.By using a memory logic's maximum operating temperature of 85°C degrees Celsius, stable operation can be achieved.It is contained within FIFOs .A OTHER FIFO memory type IC is used in the part.FIFO may operate at very low supply voltages, such as 3.15V volts.The memory logic's maximum supply voltage is 3.45V volts.This FIFO memory IC is equipped with 128 pins in total.Despite a frequency of 133.3MHz , it is capable of maintaining good accuracy.There is 133.3MHz FIFO memory IC's maximum value for regular operation.
72V3660L7-5PFGI Features
FIFOs category
Frequency at most
72V3660L7-5PFGI Applications
There are a lot of Integrated Device Technology (IDT) 72V3660L7-5PFGI FIFOs Memory applications.
- Video Processing
- Buses
- Signal processing
- Notebook
- Data-acquisition systems
- TVs
- Address mapping
- One assembly
- A/D output buffers
- Network bridges
