72V3660L7-5PFGI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Operating Mode | SYNCHRONOUS |
| Max Supply Current | 40mA |
| Frequency (Max) | 133.3MHz |
| Access Time | 5 ns |
| Organization | 4KX36 |
| Standby Current-Max | 0.015A |
| Memory Density | 147456 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V3660L7-5PFGI8 Overview
The TQFP package contains FIFO memory chip.The recommended mounting way is Surface Mount .When the supply voltage is 3.3V , high efficiency is possible.FIFO consists of 128 terminations, which indicates that FIFO means is empty.There are 128 pins for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 40mA .For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .The FIFO products must be run at a minimum temperature of -40°C degrees Celsius to ensure reliability.A memory logic's maximum operating temperature of 85°C degrees Celsius assures stable operation.In FIFOs , there is a self-contained gadget.It has a type OTHER FIFO memory IC.Typically, FIFO would work at 3.15V volts, but it may also work at higher voltages.There is a maximum supply voltage of 3.45V volts that FIFO memory can handle.There are a total of 128 pins on this FIFO memory IC.133.3MHz is the FIFO memory IC's maximum value for regular operation.
72V3660L7-5PFGI8 Features
FIFOs category
Frequency at most
72V3660L7-5PFGI8 Applications
There are a lot of Integrated Device Technology (IDT) 72V3660L7-5PFGI8 FIFOs Memory applications.
- Multimedia
- One assembly
- Extended product-change notification
- IP Radio
- Data-acquisition systems
- Consumer Systems
- SPI Bus Flash Memory Device
- Portable Information Devices
- Test Equipment
- Event Recorder
