72V3660L7-5PFI
| Parameters | |
|---|---|
| Access Time | 5 ns |
| Organization | 4KX36 |
| Density | 144 kb |
| Standby Current-Max | 0.015A |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 133.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 133.3MHz |
72V3660L7-5PFI Overview
You can find FIFO memory chip in the TQFP package.Mounting it Surface Mount is recommended.When the supply voltage is 3.3V , high efficiency is possible.The number of terminations in FIFO means is 128 .There are 128 pins for operation.In order to operate it, it requires 40mA volts of current.A voltage of 3.3V should be used for FIFO's maximum efficiency.At a minimum working temperature of -40°C degrees Celsius, FIFO is guaranteed to operate reliably.An operating temperature of 85°C °C is necessary for stable operation.A self-contained gadget is contained in FIFOs .The IC of the part is OTHER FIFO memory type.The FIFO memory chip may be operated at very low supply voltages, such as3.15V volts.A maximum supply voltage of 3.45V V can be handled by this FIFO memory chip.It consists of a total of 128 pins.When the frequency is set to 133.3MHz , the system can maintain good accuracy.During normal operation, the FIFO memory's maximum value is 133.3MHz .
72V3660L7-5PFI Features
FIFOs category
Frequency at most
72V3660L7-5PFI Applications
There are a lot of Integrated Device Technology (IDT) 72V3660L7-5PFI FIFOs Memory applications.
- Rate buffers
- Address mapping
- Cameras
- Programmable Logic Controller
- Test site
- IP Camera Buffer
- Alarm System
- High-speed disk
- SPI Bus Flash Memory Devices
- Magnetic memories
