72V3663L10PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 400mA |
| Max Supply Current | 400mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 4KX36 |
| Density | 144 kb |
| Standby Current-Max | 0.0004A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V3663L10PF Overview
You can find FIFO memory chip in the TQFP package.The recommended mounting method for this FIFO products is Surface Mount .A supply voltage of 3.3V is capable of producing high efficiency.FIFO means contains 128 terminations.These are the 128 pins for operation.In order for FIFO design to operate, a maximum current of 400mA is required.In order to maximize efficiency, the supply voltage should be set to 3.3V .For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.It is contained within FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.There is a possibility that FIFO can operate at very low supply voltages, such as 3.15V V.FIFO memory is capable of handling a maximum supply voltage of 3.45V volts.The FIFO memory IC is equipped with a total of 128 pins.Despite a frequency of 100MHz , it is capable of maintaining good accuracy.Regular operation has a FIFO memory's maximum value of 100MHz .
72V3663L10PF Features
FIFOs category
Frequency at most
72V3663L10PF Applications
There are a lot of Integrated Device Technology (IDT) 72V3663L10PF FIFOs Memory applications.
- Cameras
- Measurement Equipment
- Medical Monitoring Device
- Firmware loaders
- Computers
- Cardiac Monitoring Device
- TVs
- Temporary storage elements
- Extended product life cycle
- Multi-stage synchronizer
