72V3670L15PFI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Packaging | Tape & Reel |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 8KX36 |
| Density | 288 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V3670L15PFI8 Overview
FIFO memory chip can be found in the TQFP package.There's a Tape & Reel on the package.Mounting it in Surface Mount is recommended.When the supply voltage is 3.3V , high efficiency is possible.I found that it has 128 terminations in FIFO means.FIFO design has 128 operation pins.In order to operate it, it requires 40mA volts of current.A 3.3V supply voltage will ensure FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of -40°C degrees Celsius to ensure reliability.85°C °C is the memory logic's maximum operating temperature that allows stable operation.A self-contained gadget is contained in FIFOs .There is a memory type OTHER FIFO in the IC of this part.The FIFO memory chip may be operated at very low supply voltages, such as3.15V volts.There is a maximum supply voltage of 3.45V volts that FIFO memory can handle.Currently, it has 128 pins.In the presence of a 66.7MHz frequency, it can maintain good accuracy.Regular operation has a FIFO memory's maximum value of 66.7MHz .
72V3670L15PFI8 Features
FIFOs category
Frequency at most
72V3670L15PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72V3670L15PFI8 FIFOs Memory applications.
- Programmable Logic Controller
- Portable Information Devices
- One assembly
- Alarm System
- General Data Collection Applications at Low-Temperatures
- Battery Charger
- Network bridges
- Queues for communication systems
- Network switching/routing
- Consumer
