72V3670L6BB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 144 |
| Packaging | Bulk |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Frequency | 166MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 166MHz |
| Access Time | 4 ns |
| Organization | 8KX36 |
| Density | 288 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 6 ns |
| Height Seated (Max) | 1.97mm |
| Length | 13mm |
| Width | 13mm |
| Thickness | 1.76mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V3670L6BB Overview
This package is included in BGA .There is a case Bulk in which it is packaged.It is recommended that memory IC be mounted in the Surface Mount direction.High efficiency is possible with a supply voltage of 3.3V .The number of terminations in FIFO means is 144 .As far as the operation pins are concerned, they are 144 pins.Its maximum operating current is 40mA .For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.This gadget is self-contained in?FIFOs .The IC of the part is of the type OTHER FIFO .The FIFO memory chip may be operated at very low supply voltages, such as3.15V volts.An input voltage of 3.45V V is the maximum that FIFO memory can handle.Approximately 144 pins are attached to it.In spite of the frequency 166MHz , it is capable of maintaining a good level of accuracy.For regular operation, the memory logic's maximum value is 166MHz .
72V3670L6BB Features
FIFOs category
Frequency at most
72V3670L6BB Applications
There are a lot of Integrated Device Technology (IDT) 72V3670L6BB FIFOs Memory applications.
- Communications
- Look-up Tables
- Video time base correction
- A/D output buffers
- SPD for DDR3 Memory Modules
- Video Processing
- Programmable Logic Controller
- Test site
- Cardiac Monitoring Device
- Computer Systems
