72V3670L6PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Packaging | Bulk |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN; ASYNCHRONOUS MODE IS ALSO POSSIBLE |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Operating Mode | SYNCHRONOUS |
| Max Supply Current | 40mA |
| Frequency (Max) | 166MHz |
| Access Time | 4 ns |
| Organization | 8KX36 |
| Standby Current-Max | 0.015A |
| Memory Density | 294912 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 6 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V3670L6PF Overview
The TQFP package contains FIFO memory chip.In terms of packaging, it comes in Bulk cases.The recommended mounting way is Surface Mount .When the supply voltage is 3.3V , high efficiency is possible.The number of terminations in FIFO means is 128 .In the case of the operation pins, they are 128 pins.In order to operate it, it requires 40mA volts of current.The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.An operating temperature of 70°C °C is necessary for stable operation.In FIFOs , there is a self-contained gadget.This part is equipped with an IC of type OTHER FIFO memory.There is a possibility that FIFO may operate at a very low supply voltage, such as 3.15V V.A maximum supply voltage of 3.45V V can be handled by this FIFO memory chip.There are a total of 128 pins on this board.It is recommended that the FIFO memory's maximum value be set to 166MHz .This gadget can also be used to generate RETRANSMIT; AUTO POWER DOWN; ASYNCHRONOUS MODE IS ALSO POSSIBLE .
72V3670L6PF Features
FIFOs category
Frequency at most
72V3670L6PF Applications
There are a lot of Integrated Device Technology (IDT) 72V3670L6PF FIFOs Memory applications.
- Address mapping
- Transistors
- Magnetic memories
- General Data Collection Applications at Low-Temperatures
- Multi-stage synchronizer
- Character generators
- Controlled baseline
- Network bridges
- Look-up Tables
- Cardiac Monitoring Device
