72V3670L6PFG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 128 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN; ASYNCHRONOUS MODE IS ALSO POSSIBLE |
| HTS Code | 8542.32.00.71 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 128 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Operating Mode | SYNCHRONOUS |
| Max Supply Current | 40mA |
| Frequency (Max) | 166MHz |
| Access Time | 4 ns |
| Organization | 8KX36 |
| Memory Density | 294912 bit |
| Parallel/Serial | PARALLEL |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 6 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V3670L6PFG8 Overview
You will find FIFO memory chip in the LQFP package.Surface Mount is memory IC's recommended mounting method.A supply voltage of 3.3V allows for high efficiency.In FIFO means, there are 128 terminations.There are 128 pins on the operation pins.In order to operate FIFO design, a maximum current of 40mA is required.A voltage of 3.3V should be used for FIFO's maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.Typically, FIFO would work at 3.15V volts, but it may also work at higher voltages.The memory logic's maximum supply voltage is 3.45V volts.The FIFO memory IC has a total of 128 pins.There is 166MHz FIFO memory IC's maximum value for regular operation.It is also possible to generate RETRANSMIT; AUTO POWER DOWN; ASYNCHRONOUS MODE IS ALSO POSSIBLE by using this FIFO memory.
72V3670L6PFG8 Features
Frequency at most
72V3670L6PFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72V3670L6PFG8 FIFOs Memory applications.
- Notebook
- Product traceability
- HDD
- Disk Controllers
- Switches
- TVs
- PC peripheral
- SPI Bus Flash Memory Device
- Test site
- Buses
