72V3670L7-5PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 133.3MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 133.3MHz |
| Access Time | 5 ns |
| Organization | 8KX36 |
| Density | 288 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V3670L7-5PF Overview
You can find FIFO memory chip in the TQFP package.The recommended mounting way is Surface Mount .When the supply voltage is 3.3V , high efficiency is possible.128 terminations are contained in FIFO means.There are 128 pins for operation.FIFO design requires a maximum current of 40mA to operate.For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.In FIFOs , this gadget is self-contained.The IC of the part is OTHER FIFO memory type.If the supply voltage is very low, such as 3.15V V, FIFO may be able to operate.The FIFO memory chip is capable of handling maximum supply voltages of 3.45V volts.A total of 128 pins are present on the FIFO memory IC.In spite of the frequency 133.3MHz , it is capable of maintaining a good level of accuracy.During regular operation, 133.3MHz is the FIFO memory's maximum value.
72V3670L7-5PF Features
FIFOs category
Frequency at most
72V3670L7-5PF Applications
There are a lot of Integrated Device Technology (IDT) 72V3670L7-5PF FIFOs Memory applications.
- Battery Charger
- TVs
- Thermal Management for DDR3 Memory Modules
- Buses
- Computer Systems
- Tape controllers
- Magnetic memories
- IP Camera Buffer
- Data-acquisition systems
- High-speed graphics pixel buffer
