72V3672L10PQF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 132 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 132 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAIL BOX BYPASS REGISTER |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 132 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Data Bus Width | 36b |
| Organization | 8KX36 |
| Density | 576 kb |
| Standby Current-Max | 0.001A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 4.57mm |
| Length | 24.13mm |
| Width | 24.13mm |
| Thickness | 3.55mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
72V3672L10PQF Overview
FIFO memory chip is contained in the PQFP package.It is recommended that memory IC be mounted in the Surface Mount direction.If the supply voltage is set to 3.3V , high efficiency can be achieved.132 terminations are contained in FIFO means.As far as the operation pins are concerned, they are 132 pins.A voltage of 3.3V should be used for FIFO's maximum efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.Its maximum operating temperature of 70°C °C ensures stable operation.FIFOs contains this gadget in its entirety.A BI-DIRECTIONAL FIFO memory type IC is used in the part.Low supply voltages, such as 3.15V V, may be required for operation.FIFO memory can handle a maximum supply voltage of 3.45V volts.The FIFO memory IC has a total of 132 pins.In spite of the frequency 100MHz , it is capable of maintaining a good level of accuracy.During normal operation, the FIFO memory's maximum value is 100MHz .Additionally, this FIFO memory is capable of generating MAIL BOX BYPASS REGISTER as well.
72V3672L10PQF Features
FIFOs category
Frequency at most
72V3672L10PQF Applications
There are a lot of Integrated Device Technology (IDT) 72V3672L10PQF FIFOs Memory applications.
- Communications
- High-speed disk
- Look-up Tables
- Battery Charger
- Routers
- Application that requires re-writable nonvolatile parameter memory
- IP Radio
- Microprogramming
- Network switching/routing
- Thermal Management for DDR3 Memory Modules
