72V3673L10PF8
| Parameters | |
|---|---|
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 400mA |
| Max Supply Current | 400mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 8KX36 |
| Density | 288 kb |
| Standby Current-Max | 0.0004A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
72V3673L10PF8 Overview
FIFO memory chip can be found in the TQFP package.In the shape of a Tape & Reel , it's packaged.It is recommended that memory IC be mounted in the Surface Mount direction.When the supply voltage is 3.3V , high efficiency is possible.In FIFO means, there are 128 terminations.There are 128 pins on the operation pins.Its maximum operating current is 400mA .In order to maximize efficiency, the supply voltage should be set to 3.3V .For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.FIFOs contains this gadget in its entirety.There is a memory type OTHER FIFO in the IC of this part.FIFO may operate at a very low supply voltage, such as 3.15V V.There is a maximum supply voltage of 3.45V volts that FIFO memory can handle.The FIFO memory IC is equipped with a total of 128 pins.In the presence of a 100MHz frequency, it can maintain good accuracy.It is recommended that the FIFO memory's maximum value be set to 100MHz .
72V3673L10PF8 Features
FIFOs category
Frequency at most
72V3673L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V3673L10PF8 FIFOs Memory applications.
- Computers
- GPS Offender Tracking
- Notebook
- Networking
- Medical Monitoring Device
- Temporary storage elements
- Computer Systems
- Network bridges
- Character generators
- Test Equipment
