72V3673L15PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 400mA |
| Max Supply Current | 400mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 8KX36 |
| Density | 288 kb |
| Standby Current-Max | 0.0004A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V3673L15PF Overview
The TQFP package contains FIFO memory chip.It is pointing in the direction of Surface Mount .When the supply voltage is 3.3V there is the possibility of high efficiency.A total of 128 terminations can be found in FIFO means.128 pins are the operation pins.In order for FIFO design to operate, FIFO design requires a maximum current of 400mA .When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.An operating temperature of 70°C °C is necessary for stable operation.FIFOs contains this gadget in its entirety.This part is equipped with an IC of type OTHER FIFO memory.FIFO may operate at a very low supply voltage, such as 3.15V V.This FIFO memory chip can handle maximum supply voltages of 3.45V volts.There are a total of 128 pins on this board.It is capable of maintaining good accuracy with a frequency of 66.7MHz .The memory logic's maximum value is 66.7MHz for regular operation.
72V3673L15PF Features
FIFOs category
Frequency at most
72V3673L15PF Applications
There are a lot of Integrated Device Technology (IDT) 72V3673L15PF FIFOs Memory applications.
- Rate buffers
- GPS Offender Tracking
- Thermal Management for DDR3 Memory Modules
- Portable Information Devices
- Battery Charger
- Communications Systems
- IP Radio
- High-speed graphics pixel buffer
- Video time base correction
- Temporary storage elements
