72V3680L15PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 16KX36 |
| Density | 576 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V3680L15PF Overview
You will find FIFO memory chip in the TQFP package.The recommended mounting way is Surface Mount .When the supply voltage is 3.3V there is the possibility of high efficiency.As a result of this, FIFO means contains 128 terminations.FIFO design has 128 operation pins.In order for FIFO design to operate, a maximum current of 40mA is required.For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.In FIFOs , this gadget is self-contained.The IC of the part is OTHER FIFO memory type.The FIFO memory chip may be operated at very low supply voltages, such as3.15V volts.A maximum supply voltage of 3.45V volts can be handled by the FIFO memory chip.There are a total of 128 pins on this FIFO memory IC.When the frequency is set to 66.7MHz it can maintain good accuracy.A FIFO memory's maximum value of 66.7MHz can be used for regular operation.Components normally possess 5V power supplies.
72V3680L15PF Features
FIFOs category
Frequency at most
72V3680L15PF Applications
There are a lot of Integrated Device Technology (IDT) 72V3680L15PF FIFOs Memory applications.
- General Data Collection Applications at Extreme High-Temperatures
- Portable Information Devices
- Digital buffering
- Alarm System
- Industrial Systems
- Temporary storage elements
- Disk Controllers
- MP3 Interface for Automobile
- Network bridges
- GPS Offender Tracking
