72V3680L15PFI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 16KX36 |
| Density | 576 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V3680L15PFI8 Overview
You will find FIFO memory chip in the TQFP package.Surface Mount is memory IC's recommended mounting method.An input voltage of 3.3V results in high efficiency.The number of terminations in FIFO means is 128 .The operation pins are 128 pins.In order to operate it, it requires 40mA volts of current.A 3.3V supply voltage will ensure FIFO's maximum efficiency.This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.A memory logic's maximum operating temperature of 85°C degrees Celsius assures stable operation.It is contained within FIFOs .There is a memory type OTHER FIFO in the IC of this part.Typically, FIFO would work at 3.15V volts, but it may also work at higher voltages.FIFO memory can handle a maximum supply voltage of 3.45V V.There are a total of 128 pins on this board.A frequency of 66.7MHz is sufficient to maintain good accuracy.Regular operation has a FIFO memory's maximum value of 66.7MHz .
72V3680L15PFI8 Features
FIFOs category
Frequency at most
72V3680L15PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72V3680L15PFI8 FIFOs Memory applications.
- Data communications
- Communications Systems
- Firmware loaders
- Alarm System
- Multimedia
- Rate buffers
- MP3 Interface for Automobile
- Seismic Data Collection at Extreme Temperatures
- Data
- Computers
