72V3680L6BBG8
| Parameters | |
|---|---|
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Frequency | 166MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 166MHz |
| Access Time | 4 ns |
| Organization | 16KX36 |
| Density | 576 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 6 ns |
| Height Seated (Max) | 1.97mm |
| Length | 13mm |
| Width | 13mm |
| Thickness | 1.76mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 144 |
| Packaging | Tape & Reel |
| Published | 2008 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
72V3680L6BBG8 Overview
FIFO memory chip is contained in the BGA package.In this case, it is packaged in case number Tape & Reel .Surface Mount is memory IC's recommended mounting method.When the supply voltage is 3.3V there is the possibility of high efficiency.FIFO means contains a total of 144 terminations.In the case of the operation pins, they are 144 pins.FIFO design requires a maximum current of 40mA to operate.The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.In FIFOs , there is a self-contained gadget.There is a memory type OTHER FIFO in the IC of this part.FIFO memory chips may be operated at very low supply voltages, such as 3.15V volts.A maximum supply voltage of 3.45V V can be handled by this FIFO memory chip.As a result, it contains a total of 144 pins.With a frequency of 166MHz , it exhibits good accuracy.166MHz is the FIFO memory IC's maximum value for regular operation.
72V3680L6BBG8 Features
FIFOs category
Frequency at most
72V3680L6BBG8 Applications
There are a lot of Integrated Device Technology (IDT) 72V3680L6BBG8 FIFOs Memory applications.
- Medical Monitoring Device
- Fabrication Site
- Down-Hole Energy Drilling
- Networking
- Magnetic memories
- Firmware loaders
- General Data Collection Applications at Extreme High-Temperatures
- SPI Bus Flash Memory Device
- Buses
- HDD
