72V3680L6PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 166MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 166MHz |
| Access Time | 4 ns |
| Organization | 16KX36 |
| Density | 576 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 6 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V3680L6PF Overview
TQFP is the package in which FIFO memory chip is contained.Mounting it Surface Mount is recommended.With a supply voltage of 3.3V volts, high efficiency is possible.As a result of this, FIFO means contains 128 terminations.The operation pins are 128 pins.In order to operate FIFO design, a maximum current of 40mA is required.The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.The gadget is self-contained and can be found in FIFOs .There is a memory type OTHER FIFO in the IC of this part.FIFO may operate at very low supply voltages, such as 3.15V volts.The memory logic's maximum supply voltage is 3.45V volts.Currently, it has 128 pins.A frequency of 166MHz is sufficient to maintain good accuracy.166MHz is the FIFO memory IC's maximum value for regular operation.
72V3680L6PF Features
FIFOs category
Frequency at most
72V3680L6PF Applications
There are a lot of Integrated Device Technology (IDT) 72V3680L6PF FIFOs Memory applications.
- Queues for communication systems
- Event Recorder
- Down-Hole Energy Drilling
- Signal processing
- Telecommunication
- SPI Bus Flash Memory Device
- SPI Bus Flash Memory Devices
- One assembly
- SPD for DDR3 Memory Modules
- Communications
