Parameters |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
3.3V |
Temperature Grade |
COMMERCIAL |
Max Supply Voltage |
3.45V |
Min Supply Voltage |
3.15V |
Element Configuration |
Dual |
Nominal Supply Current |
40mA |
Max Supply Current |
40mA |
Frequency (Max) |
166MHz |
Access Time |
4 ns |
Organization |
16KX36 |
Density |
576 kb |
Standby Current-Max |
0.015A |
Parallel/Serial |
PARALLEL |
Sync/Async |
Synchronous |
Word Size |
36b |
Memory IC Type |
OTHER FIFO |
Bus Directional |
Unidirectional |
Retransmit Capability |
Yes |
Output Enable |
YES |
Cycle Time |
6 ns |
Height Seated (Max) |
1.6mm |
Length |
20mm |
Width |
14mm |
Thickness |
1.4mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Package / Case |
TQFP |
Number of Pins |
128 |
Published |
2006 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 |
Number of Terminations |
128 |
ECCN Code |
EAR99 |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
HTS Code |
8542.32.00.71 |
Subcategory |
FIFOs |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.5mm |
Frequency |
166MHz |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
128 |
72V3680L6PFG8 Overview
TQFP is a package that contains FIFO memory chip.Surface Mount is memory IC's recommended mounting method.When the supply voltage is 3.3V , high efficiency is possible.A total of 128 terminations are contained within FIFO means.There are 128 pins for operation.Its maximum operating current is 40mA .Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.It is self-contained in FIFOs .This part has a memory type of OTHER FIFO .FIFO memory chips may be operated at very low supply voltages, such as 3.15V volts.The FIFO memory chip is capable of handling maximum supply voltages of 3.45V volts.It consists of a total of 128 pins.When the frequency is set to 166MHz , the system can maintain good accuracy.Normally, the FIFO memory's maximum value is 166MHz .
72V3680L6PFG8 Features
FIFOs category
Frequency at most
72V3680L6PFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72V3680L6PFG8 FIFOs Memory applications.
- SPD for DDR3 Memory Modules
- Test site
- Firmware loaders
- Event Recorder
- Cardiac Monitoring Device
- PC peripheral
- Laser Receiver System
- Routers
- GPS Offender Tracking
- Digital buffering