72V3690L10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 32KX36 |
| Density | 1.1 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V3690L10PF8 Overview
The TQFP package contains FIFO memory chip.It is recommended that memory IC be mounted in the Surface Mount direction.A supply voltage of 3.3V allows for high efficiency.FIFO consists of 128 terminations, which indicates that FIFO means is empty.128 pins are used for operation.There is a maximum current requirement of 40mA for its operation.FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.Its maximum operating temperature of 70°C °C ensures stable operation.It is self-contained in FIFOs .A OTHER FIFO memory type IC is used in the part.Typically, FIFO would work at 3.15V volts, but it may also work at higher voltages.FIFO memory can handle a maximum supply voltage of 3.45V V.This FIFO memory IC is equipped with 128 pins in total.In spite of the frequency 100MHz , it is capable of maintaining a good level of accuracy.A FIFO memory's maximum value of 100MHz can be used for regular operation.
72V3690L10PF8 Features
FIFOs category
Frequency at most
72V3690L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V3690L10PF8 FIFOs Memory applications.
- Optical memories
- Network bridges
- Routers
- Event Recorder
- Seismic Data Collection at Extreme Temperatures
- IP Camera Buffer
- Disk Controllers
- MP3 Interface for Automobile
- Extended product life cycle
- Consumer
